Continuous-fiber composite 3D printing.

Workholding and line tooling built from your model or design in four published composite materials: one first article against your agreed critical dimensions, one defined revision. Production start is confirmed with your quote; our internal target is within one business day of approval. $0 tooling, no minimums, 60-day make-it-right on every job.

See what each material changes.

Select a material to compare the same part, its relative performance shape, and published values. Final construction still follows geometry, load path, heat, wear, and failure consequence.

Process and build envelope.

One printer, one continuous-fiber process, published specifications.

A black composite connecting link transitioning from a finished surface to a cutaway view of continuous-fiber paths around two metal bushings.
Build envelope
Maximum part size on a single build plate. Larger assemblies are split and joined.
320 × 132 × 154 MM
Layer resolution
Approximately 100 microns, tuned per part between roughly 100 and 200 microns.
~100 µM
Process
Fused-filament fabrication with continuous-fiber reinforcement in fiberglass.
FFF + CFR
Pricing base
Set by the finished design, including the material used in walls and infill, reinforcement, and overall size. Quantity discounts tier up to a 25% cap.
FROM THE DESIGN

What it is for.

Production tooling leads. End-use parts run in the same composite stack when you need parts, not just the tools that make them.

Production tooling
Soft jaws, drill guides, work-holding nests, check fixtures, gauges, and layup mandrels: quoted from your model or design as one first article against agreed critical dimensions, with one defined revision. Aluminum-class performance in the reinforced direction, where geometry and load path fit, at a fraction of the machined lead time.
TOOLING-LED
End-use composite parts
Load-bearing brackets, housings, and validated prototypes in continuous-fiber composite.
END-USE

How a print job runs.

One studio handles the whole path. No layers between you and the person running the build.

Send a file or a part

Any file works: CAD (STEP, STL, IGES, or native formats), a PDF drawing, a photo, even a phone picture of a sketch. No file? Ship the part and the studio scans it first.

DFM pre-flight

Fit to the build envelope, wall-thickness and overhang checks, and a fiber-placement plan before the first layer.

15-minute quote

The finished design, material, reinforcement, quantity, and service tier build the quote, priced within 15 minutes during business hours. Engineering review confirms final construction.

Fabrication

Continuous-fiber composite printing at 100-micron resolution. Production start is confirmed with your quote: our internal target is within one business day of approval.

Inspect and ship

Dimensional and visual verification against spec, then packed and shipped to your floor.

Already own the metal tool?
Rebuild your at-risk metal tools as domestic composite, cataloged by part number in your digital locker and reprinted on demand: a local, low-volume alternative to imported metal tooling.
PRINT-ONLY
Every reorder
Rebuild, Catalog, Replace

Send the design.

Send any file, or ship the part. Custom tooling is quoted within 15 minutes during business hours and gets a same-business-day engineering review; production start is confirmed with your quote. No file yet? Describe the problem or ask us to call.

Send a Model, Design, or Part Read the Guarantees